
Polyrubber, R0 =  1.014 g/cc

    m        U        D           P        R/R0      R         E-E0    Rem  Ref
  1.000    1.280    3.230       4.192     1.656    1.6796      0.819         1
  1.000    1.300    3.330       4.390     1.640    1.6634      0.845         1
  1.000    1.730    4.120       7.227     1.724    1.7480      1.496         1
  1.000    1.780    4.060       7.328     1.781    1.8056      1.584         1
  1.000    2.300    5.190      12.104     1.796    1.8210      2.645         1
  1.308    1.370    2.780       2.952     1.507    1.5280      0.939         1
  1.308    1.380    2.800       2.995     1.507    1.5282      0.952         1
  1.308    1.840    3.660       5.219     1.537    1.5585      1.693         1
  1.308    1.900    3.640       5.360     1.599    1.6213      1.805         1
  1.308    2.510    4.340       8.442     1.813    1.8380      3.150         1
  1.308    2.520    4.560       8.906     1.708    1.7324      3.175         1
  1.308    2.540    4.460       8.780     1.775    1.8003      3.226         1

References:
1. R. G. McQueen, S. P. Marsh, J. W. Taylor, J. N. Fritz, W. J. Carter, The
   equation of state of solids from shock wave studies. - In: High Velocity
   Impact Phenomena / Ed. R.Kinslow. - New-York: Academic Press, p.293-417;
   appendies on pp. 515-568 (1970).

Denotions:
R0   - normal density of substance, g/cc
R00  - initial density of sample, g/cc
P0   - initial gas pressure (for gaseous substances only), GPa
m    - porosity of sample
U    - particle velocity, km/s
D    - shock wave velocity, km/s
P    - pressure behind shock front, GPa
R/R0 - compression ratio behind shock front
R    - density behind shock front, g/cc
E-E0 - specific energy behind shock front, kJ/g
